Governance DocsGovernance Docs
Browse Toolkits

CART

No products in the cart.

Skip to content

ISAE 3402 Explained: The Essential 2026 Guide vs SOC 1

ISAE 3402 — ISAE 3402 Explained: The Essential 2026 Guide vs SOC 1

ISAE 3402 is the international standard for a service auditor’s report on controls at a service organisation that matter to its customers’ financial reporting — the international counterpart of the American SOC 1. If your customers are audited outside the United States, this is the report their auditors will ask for, and if they are audited on both sides of the Atlantic you will end up with one examination reported under two standards. This guide sets out what the standard is, how it differs from AT-C 320, what a dual report involves, and where the Australian and Canadian versions sit.

Free gap assessment

How much of your SOC 2 report can you already evidence?

Score yourself against the Trust Services Criteria, free, before an auditor charges you to find out.

Run the free SOC 2 gap assessment →  or  View premium report sample

What this guide covers

ISAE 3402 explained
ISAE 3402 governs the same engagement as SOC 1; seven differences decide what a dual-purpose description must handle.

What ISAE 3402 is

International Standard on Assurance Engagements 3402, Assurance Reports on Controls at a Service Organization, was issued by the International Auditing and Assurance Standards Board in December 2009 and is effective for service auditors’ assurance reports covering periods ending on or after 15 June 2011. It has not been revised since. It sits under ISAE 3000, the framework standard for assurance engagements other than audits, in the same way that AT-C 320 sits under the AICPA’s sections 105 and 205.

The engagement it governs is the same one AT-C 320 governs: the service organisation writes a description of its system and a written assertion; the service auditor examines both and reports on the fair presentation of the description, the suitability of design of the controls and, in a type 2 report, their operating effectiveness throughout the period. The report is restricted to user entities and their auditors.

The vocabulary is the same too — service organisation, user entity, user auditor, subservice organisation, carve-out and inclusive methods, complementary user entity controls, type 1 and type 2 — with one notable gap covered below. Our SOC 1 report guide explains the document; everything in it applies here.

What an ISAE 3402 report contains

The standard says what the report must state, not how it is laid out, but almost every firm uses the same five-part structure. Knowing it tells you what you are writing as management and what your customer’s auditor will read first.

Section Who writes it What it holds Covered by the opinion?
1. Independent service auditor’s assurance report Service auditor Scope, the criteria, the responsibilities of each party, the opinion, and the restriction on use It is the opinion
2. Management’s statement (the assertion) Service organisation Management’s written confirmation that the description is fairly presented and the controls were suitably designed (and, in a type 2, operated effectively), against criteria it lists Yes
3. Description of the system Service organisation The services, the transaction flows, the control objectives, the controls, subservice organisations and complementary user entity controls Yes
4. Control objectives, controls, tests and results Service auditor (tests) and management (objectives and controls) In a type 2, each test performed and any deviations found; in a type 1, usually just the objectives and controls Yes
5. Other information Service organisation Management’s responses to exceptions, future plans, business continuity notes No — the auditor reads it for inconsistency only

Two searches that land here, “ISAE 3402 statement” and “ISAE 3402 report”, usually mean sections 2 and 1 respectively. The statement is the service organisation’s document, signed by management; the report is the auditor’s. Section 5 is where a service organisation answers exceptions in its own words, and a user auditor will notice if the response there promises a fix that the tests in section 4 do not yet show.

ISAE 3402 vs SOC 1: the differences that matter

A description written for one standard can serve the other, but not automatically. Seven differences change what management must do, and a dual-purpose description has to handle each.

Topic AT-C 320 (SOC 1) ISAE 3402 What management does
Complementary subservice organisation controls Defined term; must be described where relied on No such term at all Introduce the concept at first use so an international reader understands it as an assumption about a carved-out provider
Written representations Adds non-compliance, uncorrected misstatements and fraud to the general list Lists reaffirmation of the assertion, provision of all information and access, and disclosure of non-compliance, fraud, uncorrected deviations, design deficiencies, controls not operating as described, and subsequent events Prepare for the union of both lists
Confirming the system is implemented Inquiry combined with other procedures Observation and inspection of records are required, not inquiry alone Keep an implementation evidence log that names what was observed
The transaction steps in the description Initiated, authorised, recorded, processed, corrected, reported Initiated, recorded, processed, corrected, reported — “authorised” is not listed Cover authorisation anyway; the AT-C list is the superset
Availability of criteria Criteria must be suitable Criteria must be suitable and available to user entities and their auditors List the criteria in the assertion
Refusal to give the assertion Auditor withdraws Auditor disclaims an opinion Same outcome for the service organisation: no report
Information produced by the entity An explicit requirement to evaluate its reliability No dedicated paragraph; ISAE 3000 and practice apply Establish reliability of every report used in a control regardless

None of these makes one standard stricter overall. The international text asks more of the representation letter and of implementation evidence; the American text asks more of the description’s treatment of subservice organisations and of information produced by the entity. A service organisation that prepares to the stricter of each pair satisfies both.

ISAE 3402 vs ISAE 3000 and SOC 2

ISAE 3000 (Revised), Assurance Engagements Other than Audits or Reviews of Historical Financial Information, is the umbrella standard for every assurance engagement that is not an audit or review. It has applied to assurance reports dated on or after 15 December 2015, and ISAE 3402 was amended to conform with it at that revision. ISAE 3402 is the subject-matter standard for one narrow case: controls at a service organisation that are likely to matter to user entities’ financial reporting. Everything else about a service organisation’s controls — security, availability, confidentiality, privacy — is reported under ISAE 3000 directly.

That is why “ISAE 3402 and ISAE 3000 report” is such a common request. A payroll or fund-administration provider is asked by finance teams for the financial-reporting report and by security teams for the security one, and the two are often scoped, tested and issued together.

Question ISAE 3402 ISAE 3000 (controls report) SOC 2 (AICPA)
Subject matter Controls relevant to user entities’ internal control over financial reporting Any controls the parties define, most often security and availability Controls relevant to security, availability, processing integrity, confidentiality or privacy
Criteria Control objectives the service organisation specifies Criteria the practitioner must judge suitable; often the AICPA Trust Services Criteria or a regulator’s catalogue The AICPA Trust Services Criteria
Main reader User entities and their financial statement auditors Customers’ risk, security and procurement teams Customers’ risk, security and procurement teams
Distribution Restricted to user entities and their auditors Set by the engagement; usually restricted Restricted to specified parties
US equivalent SOC 1 under AT-C 320 SOC 2 under AT-C 205 —

The short answer to “ISAE 3402 vs SOC 2” follows from the table: they answer different questions. ISAE 3402 is the financial-reporting report; SOC 2 is the US security report, and its international counterpart is an ISAE 3000 report built on the Trust Services Criteria. Our SOC 1 vs SOC 2 comparison covers that split in detail, and ISAE 3402 vs ISO 27001 covers the other choice buyers often weigh it against: an attestation report against a management-system certificate.

ISAE 3402 type 1 and type 2

The two report types are the same as under SOC 1, though the international text names them descriptively: a “report on the description and design of controls” for type 1 and a “report on the description, design and operating effectiveness of controls” for type 2. The type 2 assertion covers the whole period and the auditor’s report includes the tests and results. Neither standard sets the period’s length. Our SOC 1 Type 2 vs Type 1 guide covers the choice and the first-year constraints, all of which apply unchanged.

Dual reporting under ISAE 3402 and SSAE 18

A service organisation with customers audited in the United States and elsewhere can obtain one examination reported under both standards. The auditor performs one set of procedures and issues two reports, or one report that states both standards, and management prepares one description and one assertion written to satisfy both sets of criteria.

  • The description covers all eight AT-C 320 elements — which contain the ISAE 3402 elements — and labels complementary subservice organisation controls with an explanation.
  • The assertion lists every criterion from both standards; a criterion omitted from one reading is an omission for that reading.
  • The representation letter covers the longer international list plus the two AT-C 320 additions.
  • The auditor must be able to issue under both: a CPA firm for AT-C 320, and a practitioner subject to the IAASB’s framework, which in practice means a firm with an international network or affiliation.

The SSAE 18 guide covers the American side of the pair, including the amendments that have accumulated since 2016 without changing what management has to do.

ASAE 3402, CSAE 3416 and other national versions

Australia’s standard is ASAE 3402, issued by the Auditing and Assurance Standards Board. Its current version is dated December 2022 and is operative for service auditors’ assurance reports covering periods commencing on or after 15 December 2022. It keeps the international paragraph numbering — paragraphs 13, 16, 17, 18, 21, 38 and 53 say the same things in the same places — and adds Australian paragraphs numbered “Aus n.n”, which an organisation reporting under it must read alongside the international text.

Canada’s standard is CSAE 3416, Reporting on Controls at a Service Organization Relevant to User Entities’ Internal Control Over Financial Reporting, issued by CPA Canada. Its 2019 revision is built on CSAE 3000, the Canadian framework standard, and its paragraph numbering should not be assumed to follow the international text; a crosswalk between the two is built at topic level, with paragraph references checked against the CPA Canada Handbook. A Canadian user auditor asking for a “CSAE 3416 report” is asking for the same engagement.

UK, Germany and the Netherlands

Three more national texts show up in European requests, and each sits beside the international standard rather than replacing it.

Country Text Issued by How it relates to ISAE 3402
United Kingdom TECH 01/20 AAF, Assurance on internal controls of service organisations ICAEW Audit and Assurance Faculty Good-practice guidance, effective for reporting periods beginning on or after 1 July 2020 (it replaced TECH 01/06 AAF). Common in asset management and pensions administration; many UK reports are issued under both AAF 01/20 and ISAE 3402 at once
Germany IDW PS 951 n.F. Institut der Wirtschaftsprüfer (IDW) The German auditing standard for service organisation controls, aligned with ISAE 3402 and usually reported in German; firms commonly offer the two together
Netherlands Standaard 3402 NBA (Royal Netherlands Institute of Chartered Accountants) The Dutch adoption of ISAE 3402; an “ISAE 3402 rapport” or “rapportage” is the same report

The practical rule is simple: ask each customer which text their auditor names. Where a customer base spans two of them, a single examination reported under both is normally cheaper than two engagements.

Reading an ISAE 3402 report as a customer

The questions are the same as for a SOC 1 report: is the system the one we use, does the period cover enough of our year, is the opinion unmodified, what exceptions are in the tests, which complementary user entity controls are ours, and which subservice organisations are carved out.

Two points are specific to the international text. The auditor’s report must state, where the description relies on complementary user entity controls, that the objectives can be achieved only if those controls are suitably designed and operating — so the customer’s own controls are named as a condition of the opinion, and they are the customer’s to perform. And because the international text has no concept of complementary subservice organisation controls, a carved-out provider’s contribution may be described less explicitly; the customer should read the subservice organisation section with that in mind.

ISAE 3402 audit timeline

Neither ISAE 3402 nor AT-C 320 sets a timetable, so the figures below are typical ranges from first-time engagements, not requirements. The critical path is the type 2 period: nothing about the opinion can be accelerated once the period is chosen.

Phase Typical duration What happens
Readiness 2–4 months Scope, control objectives, a draft description, a gap review against the objectives, and fixes before any testing starts
Type 1 (optional first step) A single date, then 4–8 weeks to report Design and implementation at a point in time; useful when a customer needs something this year
Type 2 period Commonly 6–12 months; first periods are sometimes shorter Controls operate and evidence accumulates; the auditor often tests part of the period in an interim visit
Fieldwork and reporting 4–8 weeks after period end Remaining testing, exceptions discussed, the representation letter, the draft and final report
Gap cover Rolling A bridge letter from management covers the months between period end and a customer’s year end

Most service organisations settle into an annual cycle with a 12-month period aligned to their customers’ calendar year, so each user auditor gets coverage of most of its year from one report. The SOC 1 audit cost guide covers what drives the fee; the cost drivers are the same for an ISAE 3402 engagement, and dual reporting adds work at the description and reporting stages rather than a second set of tests.

Preparing for an ISAE 3402 examination

The management work is the same as for SOC 1, with the seven differences above built in from the start. Decide the scope, type and period; identify subservice organisations and choose carve-out or inclusive for each; specify control objectives that are reasonable; write the description; map risks to objectives and controls to risks; keep evidence from day one and confirm implementation by observation, not just inquiry; capture changes; then finalise the assertion, prepare for the fuller representation letter, and review the draft opinion.

The SOC 1 Toolkit was written against both standards: every document cites the AT-C 320 and ISAE 3402 paragraphs it answers, the crosswalk workbook maps all 41 AT-C identifiers to their international equivalents with the differences noted and an ASAE 3402 column, and the description templates, assertions and representation checklist are drafted to satisfy both readings at once. For an international engagement, or a dual one, the SOC 1 Toolkit is the starting point.

Further reading in this series: SOC 1 vs SOC 2, SOC 1 control objectives, the SOC 1 audit checklist, and SOC 1 audit cost, which covers dual reporting as a cost driver.

Frequently asked questions

Is ISAE 3402 the same as SOC 1?

Same engagement, different standard-setter. SOC 1 is the AICPA’s report under AT-C 320; the international report is under the IAASB’s standard. The documents look almost identical and the differences are the seven in the table above.

Which is better, ISAE 3402 or SOC 1?

Neither; the choice follows the customers’ auditors. US-audited customers need SOC 1, others need the international report, and a service organisation with both obtains a dual report from one examination.

Has ISAE 3402 been updated?

No. The standard approved in December 2009 is still the current text; it has had only conforming amendments, made when ISAE 3000 was revised. In January 2026 the IAASB issued narrow-scope amendments arising from the IESBA’s project on using the work of external experts, but they changed ISAE 3000 (Revised), ISA 620, ISRE 2400 (Revised) and ISRS 4400 (Revised), not ISAE 3402. The IAASB’s 2024–2027 work plan, as updated in March 2026, has no ISAE 3402 project; the closest item is information gathering on other subject-matter-specific assurance engagements. The IAASB’s basis for conclusions is the reference for how the standard was settled.

Is there an ISAE 3402 certification?

No, for the same reason there is no SOC 1 certification. The output is a service auditor’s assurance report on management’s description and controls for a stated period, not a certificate.

What does ISAE 3402 compliance mean?

Strictly, nothing: ISAE 3402 is a standard for the auditor, not a rulebook for the service organisation, so a company cannot be “compliant” with it. When a contract or questionnaire asks for ISAE 3402 compliance, it means an unmodified type 2 report from an independent service auditor covering the services the customer uses.

How long is an ISAE 3402 report valid?

The report has no expiry date. It covers a stated period or date, and its usefulness fades as that period recedes. User auditors generally want a report whose period overlaps most of their own financial year, plus a bridge letter for the remainder, which in practice means a new type 2 report every 12 months.

Who can perform an ISAE 3402 audit?

A professional accountant in public practice who is subject to the IESBA Code or equivalent ethics requirements and to ISQM 1, the IAASB’s quality management standard for firms (effective since 15 December 2022). In practice that means an audit firm; the service auditor must also be independent of the service organisation.

When a standard changes, know first

One email a month: edition changes, new deadlines, and what they mean for documentation you already have. No sales sequence.

We don’t spam! Read our privacy policy for more info.